Acer aspire switch 10 переустановка windows

Перед вами подробная пошаговая инструкция по установке Windows на планшет Acer Aspire Switch 10. Нашей редакцией были выбраны наиболее подходящие способы по переустановке системы для этой модели Acer.

Если данная инструкция результата не даст попробуйте доверить прошивку профессионалу. Напомним, что заводской версией системы планшета является — Windows 8.

1. Зарядите прошиваемый планшет на 100%.

2. Сохраняем с флешки, симкарты и памяти планшета все данные которые нельзя терять. Симку (если есть) можно вытащить.

3. Далее следуют два варианта:

• Скачиваем и скидываем на карту памяти или флешку(от 4 Гб) необходимую прошивку (установочную версию Windows), флешку установить в планшет. Подобрать и скачать прошивку можно здесь.

• Если есть докстанция с клавиатурой — хорошо, если нет то к USB-разъему прошиваемого планшета подключаем любую USB клавиатуру.

• Если в планшете не предусмотрен полноценный USB, то необходим еще и USB OTG кабель.

• Теперь включаем планшет и на подключенной к нему клавиатуре зажимаем кнопку Esc.

• Откроется BIOS планшета в котором необходимо выбрать диск, на котором размещена установочная система. Это та самая карта памяти или флешка, в каторую мы заранее скидывали установочную версию Windows. Обычно в BIOSе указан основной диск планшета, с которого загружаться сейчас ненужно.

• Далее сохраняем параметры, планшет перезагрузится и начнет установку Windows.

• Скачиваем и скидываем в отдельный диск на планшете или на карту памяти(от 4 Гб) необходимую прошивку (установочную версию Windows). Подобрать и скачать прошивку можно здесь.

• Запускаем файл установки системы из дистрибутива

4. Указываем раздел под виндовс или обновляем текущий.

5. В процессе установки планшет может пару раз перезагрузится — это нормально.

6. Установка завершена, настраиваем систему.

7. Готово. Если после загрузки уже установленной системы экран нереагирует на нажатия, значит в Windows не включена поддержка сенсора.

Кнопками клавиатуры выполняем переход по системе до нужного места (как мышкой).
Назначения клавиш:

Пробел — это выбор объекта

Стрелки — можно листать в списке

После этого Windows предоставит выбор метода ввода Перо и сенсорный ввод. Выбираем его и пользуемся.

Подготовлено техническим отделом Планшеты.ру
23 сентября 2016

Внимание! Любые действия Вы выполняете на свой риск. Не следует делать переустановку системы без причины.

Hi
I recently bought Switch 10. As it has only 32GB SSD splited in 24GB of windows partition and 8GB for Recovery I tried to merge those partition to get rid of Recovery and have only one SSD partition. Longbstory short, I failed and got a bluescreen, then a reboot and now I have this:
http://i.imgur.com/NmAkhgO.jpg

I have Windows 8.1 from official Microsoft website, I have orginal CDkey (not OEM from Acer). The version I downloaded is a 32/64bit installer (I think, but it may be only 32bit)
I was trying to set up BIOS by myself, but it always puts me to blue screen of windows (with error 0000225).
I provide screens of BIOS with default settings: http://imgur.com/a/jtyN2

I prepared pendrive from an .iso image with a program called Rufus, partitioning system GPT.

Читайте также:  Is not a valid date перевод

Then I changed BIOS settings to allow non secure boot and to boot first from USB HDD, and while booting I hit F12. But still I get that: http://imgur.com/yE48diG

– What I would like to do? Be able to start Windows 8.1 installator, clear all SSD partitions and make only one 32GB with windows.
– What I need? Help, becouse I cant start boot from USB and run Windows 8.1 installator.

Best Answer

I’ve found the solution, everything working fine.

To do it, you need to keep in mind two things:

1. You cannot use offical Microsoft .iso to USB program – it does not create bootable pendrive for UEFI bios, the offical Windows downloader have an option to create bootable USB from downloaded .iso, but it also isnt capable of doing so.

You have to create bootable ISO using Rufus software (simpy type rufus into google or LINK), then all you have to do is to make sure you selected GPT partition scheme for your bootable usb and FAT32 filesystem.

2. The most improtant thing is that our Acer Aspire Switch 10 supports ONLY 32bit Windows, so simply all Windows instalators which contains 64bit version are wrong. Conclusion is simple, you need only 32bit instalator, the 32bit/64bit wont work (just like only 64bit instalation which is obvious)

FAQ & Answers

Please reply to this I have the exact same problem Please .

I’ve found the solution, everything working fine.

To do it, you need to keep in mind two things:

1. You cannot use offical Microsoft .iso to USB program – it does not create bootable pendrive for UEFI bios, the offical Windows downloader have an option to create bootable USB from downloaded .iso, but it also isnt capable of doing so.

You have to create bootable ISO using Rufus software (simpy type rufus into google or LINK), then all you have to do is to make sure you selected GPT partition scheme for your bootable usb and FAT32 filesystem.

2. The most improtant thing is that our Acer Aspire Switch 10 supports ONLY 32bit Windows, so simply all Windows instalators which contains 64bit version are wrong. Conclusion is simple, you need only 32bit instalator, the 32bit/64bit wont work (just like only 64bit instalation which is obvious)

Still not recognizing the USB with a ISO on it installed with rufus

You can’t remove or merge the partition because it is “WIMboot”. Most tablets running Windows 8.1 use this. Here is a short explanation:

No mine has a 500GB added to it so I must be able too, But I want to install android on my Acer is that possible?

The HDD in the keyboard is external. It is the same as connecting a USB external HDD.

Ok thanks, But I can’t make the USB show up in my BIOS or my F12 menu

If it is not the OEM recovery it won’t. Try what piotrrosinski has posted if you are try to do a non OEM install. The OEM wimboot should use less space than a win8.1 install without recovery partition.

Читайте также:  Как получить промокод в иль де ботэ

Idk what OEM Is, I just wanna dualboot Android so badly..

The secret to getting Windows 10 on this device is to boot with an OTG USB adapter. USB from the keyboard doesn’t work. I pulled my hair out for quite a while before I tried an OTG micro USB adapter directly in the tablet and not standard USB in the keyboard port. Still need to use RUFUS to create a GPT patirion scheme for UEFI computer, formatted for FAT32 along with a 32-bit version of Windows 10.

I have an Acer aspire switch 10 notebook, and was in the process of setting it up when I was called away to put out a fire. I set a temporary pw just before shutting it down. You guessed it. I forgot or miss typed the pw, and now have no access to the unit. There is no data on the unit yet.

I purchased up a “Kon Boot” license (somewhat similar to the Rufus bootable USB method) and setup a USB drive in EFI mode. That method works with Microsoft Windows 8 and 8.1 (32Bit/64Bit), and from what I understand of reading a prior comment, it will not work with the 32Bit installation of Win 8.1 installed on the unit. However, I have not been able to get past the bios issue to test and verify this.

I need to configure the EFI BIOS to disable the Secure Boot feature so that I can try to boot the unit from with the Kon Boot USB drive.

The suggestion to use an OTG micro USB adapter directly in the tablet rather than a standard USB in the keyboard USB port may be the ticket, but how am I to know at this point. How can I access the EFI BIOS without logging on?

Better yet, how can I remove the pw or boot it to change the pw? A reset to the OEM settings requires a pw.

The system infoindicated that it is a 4 core processor with a 64Bit Win 8.1 install.

I needed to set a pw for the BIOS in order to disable the Secure Boot feature. When I boot the unit from with the Kon Boot USB drive, it still asks for the login and pw (Bummer).

Below, is what I finally did to fix the login issue.

Power on the unit

Press the Windows button (right side of display)

This generally allowed me to reset to factory settings, and all is good now.

This is NOT correct info. Who in their right minds thinks that Windows’ own installation media creator cannot create the proper media to install their own software. That’s just idiotic. HERE is the correct info:

First, you must be using 32bt installer. Switch 10 does not support 64bit. (At least mine does not) You can check the efioot folder for the file. bootx64.efi is incorrect. It should be bootia32.efi

GPT or MBR SHOULD NOT MATTER. I personally know MBR works fine. I don’t bother with GPT since I am no where near 2TB, nor can it ever be added.

Читайте также:  Восстановление фото и видео на телефоне

Drive must be FAT32

Add supervisor PW to UEFI to enable Secure Boot changes. Disable Secure Boot

Change your boot order to reflect USB HDD first.

After you hose your system and want to put it back, good luck with that. I can point you a direction on this but I haven’t successfully done it yet myself, so I don’t even say it is the ‘right’ direction. I wiped my partitions, and it’s a BAD IDEA at this point in Win10 developement IMHO. Anyways, 8.1 with Bing is a different license than 8.1. You cannot DL 8.1 with Bing in any shape or form from MS. And your embedded key will not activate ANYTHING on the list in MS media creator. There is ONE guy who has UL the factory image as a *****. It’s the UK version, but it works and you can change the lanuage pack afterwards (I think. it wasn’t annoying enough for me to try it yet) I couldn’t seem to get RUFUS to create a UEFI from the guy’s image. My solution was to use MS Media Tool to DL and create a 32bit, 8.1 usb drive. Once I verified it would indeed boot the machine, I then deleted all VISIBLE files from it and replaced them with the files from the UK ISO. DO NOT FORMAT. The whole point is to have the hidden system files and MBR intact. Just delete and then copy paste. At this point you should be able to boot and install windows. Then go DL the Master Installer from acer and it’ll install MOST of the drivers. I still cannot get my built in sound to work again. Anybody that does, help would be much appreciated.

Очередь просмотра

Очередь

  • Удалить все
  • Отключить

Хотите сохраните это видео?

  • Пожаловаться

Пожаловаться на видео?

Выполните вход, чтобы сообщить о неприемлемом контенте.

Понравилось?

Не понравилось?

Hello Friends in this video I explained about how to install Windows on Acer Aspire Switch 10e Tablet and shown end to end about installation process in any tablet you can install Windows xp, Windows 7, Windows 8, Windows 10 and more but the format need to be follow to install in Acer Aspire Switch 10e.

》Rufus is a small utility, which can format and create bootable USB flash drives, such as USB keys or pen drives, and memory sticks.

》Steps to create bootable USB

1. Inset pen drive to pc / laptop
2. Format pen drive to FAT32
3. Then selected window file to create bootable..

》Topic cover in this video

How to install Windows 7 on Acer Aspire Switch 10e
How to install Windows 8, 8.1 on Acer Aspire Switch 10e
How to install Windows 10 on Acer Aspire Switch 10e
How to reinstall Windows 8 on Acer Aspire one
How to install Windows 7 on Acer One 10

Добавить комментарий

Ваш адрес email не будет опубликован. Обязательные поля помечены *

Adblock detector